Description
Everlast 1 Winter Grade is a low temp synthetic lubricant for use in valves carrying aliphatic hydrocarbon liquids and gasses, including kerosene, fuel oils, crude distillates (sweet or sour), water, condensate, LPG systems, dilute acids and caustics. It is waterproof and has excellent resistance to oxidation.
Applications
Designed for low torque valve operation in cold environments. For use in gate, plug and ball valves. Suitable for use in hydrocarbon gasses.
DO NOT use in oxygen service.
Features
- Water resistant
- Fully additive treated
- High metal adhesion
- Excellent corrosion resistance
- Inhibited for H2S
Physical Properties
- Consistency, Cone Penetration (D-217) 220-300
- Dropping Point, °F (D-566) none
- Oil Separation, % wt. loss (D-1742) 5 max
- Oxidation Stability (D-942) 10 max
- Rust Preventive Test (D-1743) pass
- Temperature range: Winter Grade -40° to 620°F, Arctic Grade -70° to 620°F
- Color – brown
- Type Oil – synthetic
- Corrosive Inhibitor – Imidazoline Derivative
- EP Additive – Diester Type
Product Codes
- Arctic Grade – EV1AG
- Winter Grade – EV1WG
Description
Everlast 3 is a premium lubricant for high pressure applications in low temperature hydrocarbon service. Everlast 3 is available in both arctic and winter grades. It is resistant to aliphatic liquids and gasses including gasoline and kerosene, fuel and lubricating oils, natural gas and brine water. Everlast 3 AG is effective to temperatures to -70°F and is fortified with anti-rust, anti-wear, and corrosion inhibitors. The unique additive package in Everlast 3 bonds to metal surfaces reducing the damaging effects of corrosion and scale deposition on critical valve components.Applications
For valves in arctic climates. For use in plug, gate and ball valves. Suitable for use in hydrocarbon gasses. DO NOT use in oxygen service.Features
- 100% synthetic
- Water resistant
- Fully additive treated
- High metal adhesion
- Inhibited for H2S
Physical Properties
- Consistency, Cone Penetration (D-217) 220-300
- Dropping Point, °F (D-566) none
- Oil Separation, % wt. loss (D-1742) 5 max
- Oxidation Stability (D-942) 10 max
- Rust Preventive Test (D-1743) pass
- Low Temperature Torque (D-1478) @ -75°F (-60°C) start 5200 gm-cm, 10 minutes 3965 gm-cm, 60 minutes 4225 gm-cm
- Temperature range: Winter Grade -40° to 620°F, Arctic Grade -70° to 620°F
- Color – gray
Product Codes
- Arctic Grade – EV3AG
- Winter Grade – EV3WG
Description
Everlast 50-300 is a synthetic valve lubricant/sealant formulated for use in highly corrosive, low temperature services. Everlast 50-300 should be used in plug valves and ball valves handling dry gasses including natural gas, manufactured gas and LP gasses, carbon dioxide, sour crude and gas, salt water, hydrocarbons, acids or caustic solutions. 50-300 is a tenacious filmer to metal surfaces and will protect valve parts from the corrosive effects of oil and gas production and processing. 50-300 is excellent body filler in gate valves where hydrocarbon resistance is important and corrosion protection is critical.
Applications
For use in plug, ball, and gate valves in low temperature environments. Suitable for use in hydrocarbon gasses.
DO NOT use in oxygen service.
Features
- Outstanding low temp performance
- Water insoluble and washout resistant
- Fully additive treated
- 100% synthetic
- High metal adhesion
- Excellent corrosion resistance
Physical Properties
- Consistency, Cone Penetration (D-217) 220 to 260
- Dropping Point, °F (D-566) – none
- Oil Separation, % wt. Loss, (D-1742) – 5 max
- Oxidation Stability, (D-942) – 10 max
- Rust Prevention, (D-1743) – pass
- Temperature range: -50 to 300°F
- Color – dark gray
- Corrosion Inhibitor – Imidazoline Derivative
- EP Additive – Diester Type
Product Code – 50300
Description
Everlast 960 Winter Grade offers superb internal valve protection in cold climates and is biodegradable. It has excellent dual resistance to water and petroleum products. Everlast 960 WG is formulated from Lubchem’s proprietary line of Lubeflex base oils. Lubeflex oils provide an insoluble lubricant coating of internal valve components which shields metal surfaces from harsh hydrocarbon environments while maintaining ease in pumpability in cold environments.
Applications
For use in ball, plug, and gate valves.
DO NOT use in oxygen service.
Features
- 100% synthetic
- Contains Moly
- High metal adhesion
- Non-Melting
- Biodegradable
Properties
- Consistency, Cone Penetration (D-217)
- Bulk: 265 to 275
- Dropping Point, (D-566) > 288°C
- Temperature Range -40 to 400°F
- Insoluble in H2O (FTM-5415)
- Distilled H2O = Pass
- Rust Preventative Test (D-1743) – Pass
- Load Wear Index (D-2596) – 81.68
- Fuel Solubility (FTM-5414) – 12.32%
- Meets Military Spec: MIL-G-60232D AM 1, Type 1 for valve lubricants resistant to fuel
Product Code – EV960WG
Part # | Description |
---|---|
EV960WG40 | Everlast 960WG – 5 gallon/40 lb. pail |
EV960WG10 | Everlast 960WG – 10 lb./5 quart p |
EV960WG120 | Everlast 960WG – 120 lb. drum |
EV960WG420 | Everlast 960WG – 420 lb. drum |
Description
Everlast 960 AG is the only valve lubricant which allows for extreme low temperature pumpability while being insoluble in hydrocarbons. Everlast 960 AG is formulated from Lubchem’s proprietary Lubeflex line of base oils. These oils are unique in that they are insoluble in a multitude of different hydrocarbons while at the same time allowing for minimal valve torque at extreme low temperatures. Everlast 960 AG is a synthetic lubricant formulated for high chemical and mechanical stability to general hydrocarbon service. The synthetic polymer oils used in Everlast 960 AG make this an excellent all purpose valve lubricant and sealant for the oilfield. Everlast 960 AG is a blend of synthetic oils for use in valves carrying LPG, LNG, aliphatic hydrocarbon liquids and gasses including, kerosene, fuel oils, sweet and sour crude distillates, dilute acids, and caustics.
Applications
For use in ball, plug, and gate valves.
DO NOT use in oxygen service.
Features
- 100% synthetic
- Contains Moly
- High metal adhesion
- Non-Melting
- Environmentally friendly
Characteristics
- Temperature range: -75°F to 350°F
- Dual-purpose valve lubricant/sealant
- Designed for use in plug valves as a sealant and in ball and gate vales as lubricant
- Resistant to organic acids, caustic solutions and is inhibited for use in H2S and/or CO2
- Has excellent dual resistance to water and petroleum products
- Can be used in a wide variety of applications from the wellhead to product pipelines
- High metal adhesion
- 100% synthetic
- Extreme low temperature pumpability
- Does not contain Teflon, clays, titanium dioxide or other abrasive fillers
Test Method | Description | Results |
---|---|---|
FTM-5414 | Fuel Solubility | 28.66% |
DIN 51805 | Kesternich Flow Pressure @ -60°F | Flow Observed @ 20psi |
ASTM D-1403 | Un-worked Penetration, 1/2 Scale | 276 |
ASTM D-1403 | Worked Penetration, 1/2 Scale | 295 |
ASTM D-566 | Dropping Point | > 288°C |
ASTM D-2596 | Load Wear Index | 81.68 |
Last Non-Seizure Load (scar) | 100 kg (0.45mm) | |
Last Seizure Load (scar) | 315 kg (2.02 mm) | |
Weld Load | 400 kg |
Ordering Information
Part # | Description |
---|---|
EV96040 | Everlast 960/5 gallon/40 lb. pail |
EV960J16 | Everlast 960/Size J(1-1/2” x 9”) 6 per box |
EV14610 | Everlast 960/10 lb./5 quart p |
EV146120 | Everlast 146-120 lb. drum |
EV146420 | Everlast 146-420 lb. drum |
Description
Suitable for use as a low temp gate valve body filler or as a ball valve lubricant. Longlife 1600 is a low temperature, multi-purpose, water insoluble grease that will provide low torque operation in very cold operating environments. It contains a proprietary anti-galling additive and corrosion inhibitor designed to protect seat rings, springs, and sealing surfaces from the corrosive effects of oil and gas production and processing.
Application
For use in ball and gate valves in low temperature environments. Suitable for use in hydrocarbon gasses.
DO NOT use in oxygen service.
Features
- Outstanding low temp performance
- Water insoluble and washout resistant
- Fully additive treated
- Premium quality lithium 12-hydroxy stearate grease
- Superior protection to lubricate a wide variety of heavy-duty equipment
- Low staining
Physical Properties
- NLGI No. 2
- Thickener – Anhydrous Calcium
- Temperature range: -75° to 350°F
- Color/texture – gray/smooth adhesive
- Rust prevention – D-1743, rating pass
- Worked 60 penetration – D-217, 265 to 295
- Dropping point – D-566, 365°F
- Oil separation – D-1742, % loss 5
- Timken OK load – D-2509, lb 45
- Four-ball wear – D-2266, mm 0.56
- Four-ball EP weld point – D-2596, kgf, 315
Product Code – BPA
Description
Longlife Moly LT – EP Grease is a fully additive treated, multi-purpose grease that is water insoluble and treated for extra protection. It contains antirust, anti-wear, extreme pressure, and antioxidant additives. It is a good quality molybdenum disulfide compounded low temperature grease, also treated with soluble chemical additives to prevent wear, especially under very highly loaded conditions. Use Longlife Moly LT in low temperature applications where medium to severe conditions prevail.
Features
- Water insoluble and washout resistant
- Fully additive treated
- Excellent low temperature performance
Physical Properties
- NLGI No. 2
- Thickener – Anhydrous Calcium
- Color/texture – observed gray/smooth with slight fiber
- Worked 60 penetration – D-217, 265 to 295
- Dropping point – D-566, 285°F, 140°C
- Wheel Bearing Leakage – D-1263, rating pass
- Oil separation – D-1742, % loss 5
- Timken OK load – D-2509, lb 45
- Rust prevention – D-1743, rating pass
- Oxidation Stability – D-942, psi drop 4.0 at 100 hr.
- Approximate temperature range: -65° to 280°F
Product Code – LMLT
Description
Everlast 1 is a biodegradable synthetic lubricant for use in valves carrying aliphatic hydrocarbon liquids and gasses, including kerosene, fuel oils, crude distillates (sweet or sour), water, condensate, dilute acids and caustics. It is waterproof and has excellent resistance to oxidation and high metal adhesion. Everlast 1 should be used as a hydrocarbon resistant ball and gate valve lubricant. Everlast 1 is approved by most major valve manufacturers.
Applications
For use in plug, gate and ball valves. Suitable for use in hydrocarbon gasses.
DO NOT use in oxygen service.
Features
- Water resistant
- Fully additive treated
- 100% synthetic
- High metal adhesion
- Inhibited for H2S
Physical Properties
- Consistency, Cone Penetration (D-217) 220-300
- Dropping Point, °F (D-566) none
- Oil Separation, % wt. loss (D-1742) 5 max
- Oxidation Stability (D-942) 10 max
- Rust Preventive Test (D-1743) pass
- Temperature range: 40° to 400°F, -40° to 204°C
- Color – brown
- Type Oil – synthetic
- Corrosive Inhibitor – Imidazoline Derivative
- EP Additive – Diester Type
Product Code – EV1
Description
Everlast 3 is a synthetic lubricant for high temperature applications in hydrocarbon service. Everlast 3 is chemically resistant to aliphatic liquids and gasses, including gasoline and kerosene, fuel and lubricating oils, natural gas and brine water. Everlast 3 is effective at temperatures to 500°F and is fortified with anti-rust, anti-wear, and corrosion inhibitors. The unique additive package in Everlast 3 bonds to metal surfaces reducing the damaging effects of corrosion and scale deposition on critical valve components.
Applications
For use in plug, gate, and ball valves. Suitable for use in hydrocarbon gasses.
DO NOT use in oxygen service.
Features
- 100% synthetic
- Water resistant
- Fully additive treated
- High metal adhesion
- Inhibited for H2S
Physical Properties
- Consistency, Cone Penetration (D-217) 220-300
- Dropping Point, °F (D-566) none
- Oil Separation, % wt. loss (D-1742) 5 max
- Oxidation Stability (D-942) 10 max
- Rust Preventive Test (D-1743) pass
- Temperature range: -10° to 550°F
- Color – tan
- Type Oil – synthetic
- Corrosive Inhibitor – Imidazoline Derivative
- EP Additive – Diester Type
Product Code – EV3
Description
Everlast 118 is a high temperature, synthetic valve lubricant and sealant for gate, ball, and plug valves. This product is thermally stable to 600°F. It is a hydrocarbon resistant lubricant for use in methane, ethylene, propane, crude oil and diesel. This grease provides corrosion protection against CO2 and H2D and is water resistant.
Applications
For use in high temperature gate valves and ball valves. Suitable for use in hydrocarbon gasses.
DO NOT use in oxygen service.
Features
- Fully additive treated
- 100% synthetic
- High metal adhesion
- Inhibited for H2S and CO2
Physical Properties
- Color – dark gray to black
- Temperature range: -40 to 600°F
- Penetration, 25°C, wkd, 60 strokes 220 to 230
- Drop Point, °C none
- Oxidation Stability, (D-942) 10 max
- Specific Gravity @ 25°C 1.02
Product Code – 118
Description
Premium synthetic oils and inorganic thickeners make Everlast 1000 a high temperature, non-melting lubricant/sealant for valves in geothermal, petroleum refineries and natural gas plants. This high temperature lubricant/sealant is formulated for resistance to aliphatic hydrocarbons, including gasoline, kerosene, propane, butane, natural gas, steam, hot oil, dilute acids and caustic solutions. Everlast 1000 is an excellent moly/graphite type anti-seize compound and should be used to protect threaded connections from galling and wear. Everlast 1000 converts to a dry film lubricant at elevated temperatures and will not harden.
Features
- Non-melting
- Converts to a solid film lubricant
- Contains molybdenum disulfide (moly)
Physical Properties
- Consistency, Cone Penetration (D-217) 200 to 230
- Dropping Point, °F (D-566) none
- Oil Separation, % wt. Loss (D-1742) 5 max
- Flash Point COC, °C (°F), 243 (470)
- Fire Point COC, °C (°F), 307 (585)
- Density, lbs/gal 7.85
- Evaporation Loss 10 hours at 210°F (D-972) 0.10
- Temperature range: -20 to 1000°F
Product Code – EVK
Description
Everlast 4 is a biodegradable synthetic lubricant formulated for high chemical and mechanical stability to general hydrocarbon service. The synthetic polymer oils used in Everlast 4 make this an excellent all purpose plug valve lubricant and sealant for the oilfield and petrochemical industries. Everlast 4 is a blend of synthetic oils for use in valves carrying LPG, LNG, aliphatic hydrocarbon liquids and gasses, including kerosene, fuel oils, crude distillates (sweet or sour), water, condensate, dilute acids and caustics. It is waterproof and has excellent resistance to oxidation and high metal adhesion.
Applications
For use in plug, gate and ball valves. Suitable for use in hydrocarbon liquids and gasses.
DO NOT use in oxygen service.
Features
- 100% synthetic
- Water resistant
- Fully additive treated
- High metal adhesion
- Inhibited for H2S
Physical Properties
- Consistency, Cone Penetration (D-217) 150-200
- Dropping Point, °F (D-566) none
- Oil Separation, % wt. loss (D-1742) 5 max
- Oxidation Stability (D-942) 10 max
- Rust Preventive Test (D-1743) pass
- Temperature range: -40° to 500°F
- Color – brown
- Type Oil – synthetic
- Corrosive Inhibitor – Imidazoline Derivative
Product Code – EV4