1-800-929-0244

MAINTENANCE

PRODUCTS

Maintenance

Features



  • 50:1 air motor and pump tube
  • Discharge pressure 5,000 psi
  • Follower plate
  • Bucket cover and handle assembly
  • 10-foot discharge hose 1/4 ID
  • Control valve
  • Gauge tee
  • 15k gauge
  • Whip hose
  • Straight swivel
  • Giant button head coupler 1/4 NPTF

Features



  • 100:1 air motor and pump tube
  • Discharge pressure 10,000 psi
  • Follower plate
  • Bucket mount cover and handle assembly
  • 10-foot discharge hose
  • Control valve
  • Gauge tee
  • 15k gauge
  • Whip hose
  • Straight swivel
  • Giant button head coupler

Lubchem Force Flow Lube Pumps



Lubchem Force Flow grease pumps are reliable, heavy duty air operated pumps. Each pump is equipped with 100:1 ratio air motor that is capable of 10,000 psi discharge pressures. Discharge pressure may be adjusted by regulating the inlet air pressure to the pump through the air inlet regulator. Force Flow pumps are equipped with twin cylinders that provide continuous contact between the follower plate and the sealant providing a continuous prime to the pump. The positive pressure applied by the pressure priming system prevents pump cavitation and makes it possible to pump highly viscous sealants at low temperatures.

Force Flow 100 Features



  • Total Force Flow weight = 100 lbs.
  • High volume delivery is 1/2 ounce per stroke.
  • Five inch air motor, 100:1 ratio.
  • For use with 40 lb and 5 qt cans.
  • Moisture trap and air inlet regulator included.
  • Durable light-weight design.
  • Air inlet gauge and discharge pressure gauge included.
  • Permanently lubricated pneumatic rams.
  • Pumps 5 lbs per minute of NLGI #2 grease.
  • Adjustable discharge pressure up to 10,000 psi.
  • Maximum air inlet pressure is 100 psi.
  • 10 foot discharge hose is included

Description



The Lubchem 1200 and 1500 Hand Guns apply up to 10,000 psi and 15,000 psi, respectively, of discharge pressure with a minimum amount of applied force by the user. The guns are set up for lubricating both ball valves and plug valves. The pumps are heavy duty, lever operated and are primed by tightening the “T” screw handle. Both pumps accept industry standard K size lube sealant grease sticks. The outlet thread is 1/4 NPTF. Additional hose assemblies and options are available upon request.
Hose Assembly (Part # 967801, sold separately)

Part Numbers



When ordering, use the following part numbers:

  • Model 1200 – part number 901601
  • Model 1500 – part number 908301
  • Hose assembly – part number 967801


Diagram



See the table below for a description of each numbered item on this diagram:
Item
Description

Description



The Lubchem 1000 Hydraulic Hand Pump exerts a maximum pressure of 10,000 psi. It is a durable self-priming pump that is easy to operate. This unit is equipped with a bypass valve that allows the user to relieve internal pressure at any time by turning the bypass valve counter clockwise one revolution.

As an added safety feature, the Lubchem model 1000 is equipped with an internal hydraulic relief valve. This feature provides maximum safety for the user by preventing over pressurization of the hydraulic system.
Hose Assembly (Part # 967801, sold separately)

Features



  • Handle latch assembly – Prevents damage due to over extension of the piston.
  • Graduated handle – One ounce marked handle to eliminate waste and provide greater accuracy during injection.
  • Warning – Use only UCON-500 hydraulic fluid or equal in this pump.
  • Lubricant stick size – J
  • Grease delivery – 1 ounce per 40 strokes
  • Hose assembly – included
  • Pressure rating – 10,000 psi
  • 15,000 psi gauge included
  • Total weight – 13 lbs.


Repair and Exchange



Lubchem offers reconditioning and repair of all types of hydraulic hand guns. Simply send the gun to us and we will promptly respond with an estimate for the repair charges. Estimates are provided at no cost to you. Normally, the gun is returned to you within one week of your approval for the repairs.

Replacement parts and repair kits are available upon request.

Part Numbers



When ordering, use the following part numbers:

  • Model 1000 Hydraulic Hand Pump – part number 900011
  • Hose assembly – part number 967801


Diagram



See the table below for a description of each numbered item on this diagram:
Item
Part Number
Description

Let's work together

Provide You The Highest Quality
Work That Meets Your Expectation.

CALL BACK

request Technical Support