1-800-929-0244

Valve Lubricants

Winter/Arctic Grade Lubricants

Everlast 1 Winter Grade Low Temp Multi-Purpose

Description

Everlast 1 Winter Grade is a low temp synthetic lubricant for use in valves carrying aliphatic hydrocarbon liquids and gasses, including kerosene, fuel oils, crude distillates (sweet or sour), water, condensate, LPG systems, dilute acids and caustics. It is waterproof and has excellent resistance to oxidation.

Applications

Designed for low torque valve operation in cold environments. For use in gate, plug and ball valves. Suitable for use in hydrocarbon gasses.

DO NOT use in oxygen service.

Features

  • Water resistant
  • Fully additive treated
  • High metal adhesion
  • Excellent corrosion resistance
  • Inhibited for H2S

Physical Properties

  • Consistency, Cone Penetration (D-217) 220-300
  • Dropping Point, °F (D-566) none
  • Oil Separation, % wt. loss (D-1742) 5 max
  • Oxidation Stability (D-942) 10 max
  • Rust Preventive Test (D-1743) pass
  • Temperature range: Winter Grade -40° to 620°F, Arctic Grade -70° to 620°F
  • Color – brown
  • Type Oil – synthetic
  • Corrosive Inhibitor – Imidazoline Derivative
  • EP Additive – Diester Type

Product Codes

  • Arctic Grade – EV1AG
  • Winter Grade – EV1WG

Everlast 3 WG/AG Low Temp/High Pressure

Description

Everlast 3 is a premium lubricant for high pressure applications in low temperature hydrocarbon service. Everlast 3 is available in both arctic and winter grades. It is resistant to aliphatic liquids and gasses including gasoline and kerosene, fuel and lubricating oils, natural gas and brine water. Everlast 3 AG is effective to temperatures to -70°F and is fortified with anti-rust, anti-wear, and corrosion inhibitors. The unique additive package in Everlast 3 bonds to metal surfaces reducing the damaging effects of corrosion and scale deposition on critical valve components.

Applications

For valves in arctic climates. For use in plug, gate and ball valves. Suitable for use in hydrocarbon gasses.

DO NOT use in oxygen service.

Features

  • 100% synthetic
  • Water resistant
  • Fully additive treated
  • High metal adhesion
  • Inhibited for H2S

Physical Properties

  • Consistency, Cone Penetration (D-217) 220-300
  • Dropping Point, °F (D-566) none
  • Oil Separation, % wt. loss (D-1742) 5 max
  • Oxidation Stability (D-942) 10 max
  • Rust Preventive Test (D-1743) pass
  • Low Temperature Torque (D-1478) @ -75°F (-60°C) start 5200 gm-cm, 10 minutes 3965 gm-cm, 60 minutes 4225 gm-cm
  • Temperature range: Winter Grade -40° to 620°F, Arctic Grade -70° to 620°F
  • Color – gray

Product Codes

    Arctic Grade – EV3AG
    Winter Grade – EV3WG

Everlast 50-300 Low Temperature H2S/CO2

Description

Everlast 50-300 is a synthetic valve lubricant/sealant formulated for use in highly corrosive, low temperature services. Everlast 50-300 should be used in plug valves and ball valves handling dry gasses including natural gas, manufactured gas and LP gasses, carbon dioxide, sour crude and gas, salt water, hydrocarbons, acids or caustic solutions. 50-300 is a tenacious filmer to metal surfaces and will protect valve parts from the corrosive effects of oil and gas production and processing. 50-300 is excellent body filler in gate valves where hydrocarbon resistance is important and corrosion protection is critical.

Applications

For use in plug, ball, and gate valves in low temperature environments. Suitable for use in hydrocarbon gasses.

DO NOT use in oxygen service.

Features

  • Outstanding low temp performance
  • Water insoluble and washout resistant
  • Fully additive treated
  • 100% synthetic
  • High metal adhesion
  • Excellent corrosion resistance

Physical Properties

  • Consistency, Cone Penetration (D-217) 220 to 260
  • Dropping Point, °F (D-566) – none
  • Oil Separation, % wt. Loss, (D-1742) – 5 max
  • Oxidation Stability, (D-942) – 10 max
  • Rust Prevention, (D-1743) – pass
  • Temperature range: -50 to 300°F
  • Color – dark gray
  • Corrosion Inhibitor – Imidazoline Derivative
  • EP Additive – Diester Type

Product Code – 50300

Everlast 960 WG – Low Temp Hydrocarbon Resistant Lubricant/Sealant

Description

Everlast 960 Winter Grade offers superb internal valve protection in cold climates and is biodegradable. It has excellent dual resistance to water and petroleum products. Everlast 960 WG is formulated from Lubchem’s proprietary line of Lubeflex base oils. Lubeflex oils provide an insoluble lubricant coating of internal valve components which shields metal surfaces from harsh hydrocarbon environments while maintaining ease in pumpability in cold environments.

Applications

For use in ball, plug, and gate valves.

DO NOT use in oxygen service.

Features

  • 100% synthetic
  • Contains Moly
  • High metal adhesion
  • Non-Melting
  • Biodegradable

Properties

  • Consistency, Cone Penetration (D-217)
  • Bulk: 265 to 275
  • Dropping Point, (D-566) > 288°C
  • Temperature Range -40 to 400°F
  • Insoluble in H2O (FTM-5415)
  • Distilled H2O = Pass
  • Rust Preventative Test (D-1743) – Pass
  • Load Wear Index (D-2596) – 81.68
  • Fuel Solubility (FTM-5414) – 12.32%
  • Meets Military Spec: MIL-G-60232D AM 1, Type 1 for valve lubricants resistant to fuel

Product Code – EV960WG

Part # Description
EV960WG40 Everlast 960WG – 5 gallon/40 lb. pail
EV960WG10 Everlast 960WG – 10 lb./5 quart p
EV960WG120 Everlast 960WG – 120 lb. drum
EV960WG420 Everlast 960WG – 420 lb. drum

Everlast 960 AG – Hydrocarbon Resistant Lubricant/Sealant

Description

Everlast 960 AG is the only valve lubricant which allows for extreme low temperature pumpability while being insoluble in hydrocarbons. Everlast 960 AG is formulated from Lubchem’s proprietary Lubeflex line of base oils. These oils are unique in that they are insoluble in a multitude of different hydrocarbons while at the same time allowing for minimal valve torque at extreme low temperatures. Everlast 960 AG is a synthetic lubricant formulated for high chemical and mechanical stability to general hydrocarbon service. The synthetic polymer oils used in Everlast 960 AG make this an excellent all purpose valve lubricant and sealant for the oilfield. Everlast 960 AG is a blend of synthetic oils for use in valves carrying LPG, LNG, aliphatic hydrocarbon liquids and gasses including, kerosene, fuel oils, sweet and sour crude distillates, dilute acids, and caustics.

Applications

For use in ball, plug, and gate valves.

DO NOT use in oxygen service.

Features

  • 100% synthetic
  • Contains Moly
  • High metal adhesion
  • Non-Melting
  • Environmentally friendly

Characteristics

  • Temperature range: -75°F to 350°F
  • Dual-purpose valve lubricant/sealant
  • Designed for use in plug valves as a sealant and in ball and gate vales as lubricant
  • Resistant to organic acids, caustic solutions and is inhibited for use in H2S and/or CO2
  • Has excellent dual resistance to water and petroleum products
  • Can be used in a wide variety of applications from the wellhead to product pipelines
  • High metal adhesion
  • 100% synthetic
  • Extreme low temperature pumpability
  • Does not contain Teflon, clays, titanium dioxide or other abrasive fillers
Test Method Description Results
FTM-5414 Fuel Solubility 28.66%
DIN 51805 Kesternich Flow Pressure @ -60°F Flow Observed @ 20psi
ASTM D-1403 Un-worked Penetration, 1/2 Scale 276
ASTM D-1403 Worked Penetration, 1/2 Scale 295
ASTM D-566 Dropping Point > 288°C
ASTM D-2596 Load Wear Index 81.68
Last Non-Seizure Load (scar) 100 kg (0.45mm)
Last Seizure Load (scar) 315 kg (2.02 mm)
Weld Load 400 kg

Ordering Information

Part # Description
EV96040 Everlast 960/5 gallon/40 lb. pail
EV960J16 Everlast 960/Size J(1-1/2” x 9”) 6 per box
EV14610 Everlast 960/10 lb./5 quart p
EV146120 Everlast 146-120 lb. drum
EV146420 Everlast 146-420 lb. drum

Longlife 1600 A – Arctic Grade Lubricant

Description

Suitable for use as a low temp gate valve body filler or as a ball valve lubricant. Longlife 1600 is a low temperature, multi-purpose, water insoluble grease that will provide low torque operation in very cold operating environments. It contains a proprietary anti-galling additive and corrosion inhibitor designed to protect seat rings, springs, and sealing surfaces from the corrosive effects of oil and gas production and processing.

Application

For use in ball and gate valves in low temperature environments. Suitable for use in hydrocarbon gasses.

DO NOT use in oxygen service.

Features

  • Outstanding low temp performance
  • Water insoluble and washout resistant
  • Fully additive treated
  • Premium quality lithium 12-hydroxy stearate grease
  • Superior protection to lubricate a wide variety of heavy-duty equipment
  • Low staining

Physical Properties

  • NLGI No. 2
  • Thickener – Anhydrous Calcium
  • Temperature range: -75° to 350°F
  • Color/texture – gray/smooth adhesive
  • Rust prevention – D-1743, rating pass
  • Worked 60 penetration – D-217, 265 to 295
  • Dropping point – D-566, 365°F
  • Oil separation – D-1742, % loss 5
  • Timken OK load – D-2509, lb 45
  • Four-ball wear – D-2266, mm 0.56
  • Four-ball EP weld point – D-2596, kgf, 315

Product Code – BPA

Longlife Moly LT – Heavy Duty Moly Lubricant

Description

Longlife Moly LT – EP Grease is a fully additive treated, multi-purpose grease that is water insoluble and treated for extra protection. It contains antirust, anti-wear, extreme pressure, and antioxidant additives. It is a good quality molybdenum disulfide compounded low temperature grease, also treated with soluble chemical additives to prevent wear, especially under very highly loaded conditions. Use Longlife Moly LT in low temperature applications where medium to severe conditions prevail.

Features

  • Water insoluble and washout resistant
  • Fully additive treated
  • Excellent low temperature performance

Physical Properties

  • NLGI No. 2
  • Thickener – Anhydrous Calcium
  • Color/texture – observed gray/smooth with slight fiber
  • Worked 60 penetration – D-217, 265 to 295
  • Dropping point – D-566, 285°F, 140°C
  • Wheel Bearing Leakage – D-1263, rating pass
  • Oil separation – D-1742, % loss 5
  • Timken OK load – D-2509, lb 45
  • Rust prevention – D-1743, rating pass
  • Oxidation Stability – D-942, psi drop 4.0 at 100 hr.
  • Approximate temperature range: -65° to 280°F

Product Code – LMLT

Regular Grade Lubricants

Everlast 1 Multi-Purpose Lubricant

Description

Everlast 1 is a biodegradable synthetic lubricant for use in valves carrying aliphatic hydrocarbon liquids and gasses, including kerosene, fuel oils, crude distillates (sweet or sour), water, condensate, dilute acids and caustics. It is waterproof and has excellent resistance to oxidation and high metal adhesion. Everlast 1 should be used as a hydrocarbon resistant ball and gate valve lubricant. Everlast 1 is approved by most major valve manufacturers.

Applications

For use in plug, gate and ball valves. Suitable for use in hydrocarbon gasses.

DO NOT use in oxygen service.

Features

  • Water resistant
  • Fully additive treated
  • 100% synthetic
  • High metal adhesion
  • Inhibited for H2S

Physical Properties

  • Consistency, Cone Penetration (D-217) 220-300
  • Dropping Point, °F (D-566) none
  • Oil Separation, % wt. loss (D-1742) 5 max
  • Oxidation Stability (D-942) 10 max
  • Rust Preventive Test (D-1743) pass
  • Temperature range: 40° to 400°F, -40° to 204°C
  • Color – brown
  • Type Oil – synthetic
  • Corrosive Inhibitor – Imidazoline Derivative
  • EP Additive – Diester Type
  • Product Code – EV1

Everlast 3 High Temp/High Pressure

Description

Everlast 3 is a synthetic lubricant for high temperature applications in hydrocarbon service. Everlast 3 is chemically resistant to aliphatic liquids and gasses, including gasoline and kerosene, fuel and lubricating oils, natural gas and brine water. Everlast 3 is effective at temperatures to 500°F and is fortified with anti-rust, anti-wear, and corrosion inhibitors. The unique additive package in Everlast 3 bonds to metal surfaces reducing the damaging effects of corrosion and scale deposition on critical valve components.

Applications

For use in plug, gate, and ball valves. Suitable for use in hydrocarbon gasses.

DO NOT use in oxygen service.

Features

  • 100% synthetic
  • Water resistant
  • Fully additive treated
  • High metal adhesion
  • Inhibited for H2S

Physical Properties

  • Consistency, Cone Penetration (D-217) 220-300
  • Dropping Point, °F (D-566) none
  • Oil Separation, % wt. loss (D-1742) 5 max
  • Oxidation Stability (D-942) 10 max
  • Rust Preventive Test (D-1743) pass
  • Temperature range: -10° to 550°F
  • Color – tan
  • Type Oil – synthetic
  • Corrosive Inhibitor – Imidazoline Derivative
  • EP Additive – Diester Type

Product Code – EV3

Everlast 118 High Temp Valve Lubricant

Description

Everlast 118 is a high temperature, synthetic valve lubricant and sealant for gate, ball, and plug valves. This product is thermally stable to 600°F. It is a hydrocarbon resistant lubricant for use in methane, ethylene, propane, crude oil and diesel. This grease provides corrosion protection against CO2 and H2D and is water resistant.

Applications

For use in high temperature gate valves and ball valves. Suitable for use in hydrocarbon gasses.

DO NOT use in oxygen service.

Features

  • Fully additive treated
  • 100% synthetic
  • High metal adhesion
  • Inhibited for H2S and CO2

Physical Properties

  • Color – dark gray to black
  • Temperature range: -40 to 600°F
  • Penetration, 25°C, wkd, 60 strokes 220 to 230
  • Drop Point, °C none
  • Oxidation Stability, (D-942) 10 max
  • Specific Gravity @ 25°C 1.02

Product Code – 118

Everlast 1000 High Temperature Valve Lube

Description

Premium synthetic oils and inorganic thickeners make Everlast 1000 a high temperature, non-melting lubricant/sealant for valves in geothermal, petroleum refineries and natural gas plants. This high temperature lubricant/sealant is formulated for resistance to aliphatic hydrocarbons, including gasoline, kerosene, propane, butane, natural gas, steam, hot oil, dilute acids and caustic solutions. Everlast 1000 is an excellent moly/graphite type anti-seize compound and should be used to protect threaded connections from galling and wear. Everlast 1000 converts to a dry film lubricant at elevated temperatures and will not harden.

Features

  • Non-melting
  • Converts to a solid film lubricant
  • Contains molybdenum disulfide (moly)
  • Physical Properties

    • Consistency, Cone Penetration (D-217) 200 to 230
    • Dropping Point, °F (D-566) none
    • Oil Separation, % wt. Loss (D-1742) 5 max
    • Flash Point COC, °C (°F), 243 (470)
    • Fire Point COC, °C (°F), 307 (585)
    • Density, lbs/gal 7.85
    • Evaporation Loss 10 hours at 210°F (D-972) 0.10
    • Temperature range: -20 to 1000°F

    Product Code – EVK

Everlast 4 Hydrocarbon Resistant

Description

Everlast 4 is a biodegradable synthetic lubricant formulated for high chemical and mechanical stability to general hydrocarbon service. The synthetic polymer oils used in Everlast 4 make this an excellent all purpose plug valve lubricant and sealant for the oilfield and petrochemical industries. Everlast 4 is a blend of synthetic oils for use in valves carrying LPG, LNG, aliphatic hydrocarbon liquids and gasses, including kerosene, fuel oils, crude distillates (sweet or sour), water, condensate, dilute acids and caustics. It is waterproof and has excellent resistance to oxidation and high metal adhesion.

Applications

For use in plug, gate and ball valves. Suitable for use in hydrocarbon liquids and gasses.

DO NOT use in oxygen service.

Features

  • 100% synthetic
  • Water resistant
  • Fully additive treated
  • High metal adhesion
  • Inhibited for H2S

Physical Properties

  • Consistency, Cone Penetration (D-217) 150-200
  • Dropping Point, °F (D-566) none
  • Oil Separation, % wt. loss (D-1742) 5 max
  • Oxidation Stability (D-942) 10 max
  • Rust Preventive Test (D-1743) pass
  • Temperature range: -40° to 500°F
  • Color – brown
  • Type Oil – synthetic
  • Corrosive Inhibitor – Imidazoline Derivative
  • Product Code – EV4

    Everlast 4B Gate Valve Lubricant Sealant

    Description

    Everlast 4B is a high performance synthetic valve lubricant and sealant for gate valves. The advanced polymers and extreme pressure additives used in this product make it an excellent choice for use in high-pressure valves carrying natural gas, crude oil, condensate and ethylene. Everlast 4B contains unique solid lubricant additives that prevent metal to metal contact under extreme conditions of pressure and temperature.

    Performance

    Everlast 4B is a specialized lubricant for close tolerance valves and will provide outstanding lubricity and high adhesion to polished metal surfaces. This grease provides corrosion protection and is water-resistant.

    Physical Properties

    • Color – black
    • Temperature range: -20°F to 450F
    • Penetration, 25°C, wkd, 60 STR. 150 – 165
    • Drop Point, Deg. °C none
    • Oxidation Stability, (D-942), 10 max

    Product Code – EV4B

    Everlast 116 Multi-Purpose Valve Lubricant

    Description

    Everlast 116 is a high performance, multi-purpose, synthetic valve lubricant and sealant for gate, ball, and plug valves. It is insoluble in water, hexane, and propylene glycol. The advanced polymers used in this formulation make it an excellent choice for valves carrying natural gas, crude oil, condensate, and ethylene. Everlast 116 is a specialized lubricant for close tolerance valves and will provide outstanding lubricity and high adhesion to polished metal surfaces. This grease provides corrosion protection against CO2 and H2S and is water-resistant.

    Applications

    For use in gate valves and ball valves. Suitable for use in hydrocarbon gasses.

    DO NOT use in oxygen service.

    Features

    • Fully additive treated
    • 100% synthetic
    • High metal adhesion
    • Inhibited for H2S and CO2

    Physical Properties

    • Color – white
    • Freeze Point – -50°C
    • Temperature range: -40 to 400°F
    • Penetration, 25°C, wkd, 60 strokes 230 to 240
    • Drop Point, °C none
    • Oxidation Stability, (D-942) 10 max
    • Specific Gravity @ 25°C 1.08

    Product Code – 116

    Everlast 117 EP Valve Lubricant

    Description

    Everlast 117 is an extreme pressure synthetic valve lubricant and sealant for gate, ball, and plug valves. Everlast 117 is designed for use in close tolerance valves and will provide outstanding lubricity and reduced operating torque. Extensive laboratory evaluation has shown Everlast 117 to reduce operating torque by up to 50%. The additive package in this product provides excellent antioxidant, extreme pressure, and anti-wear properties and should be used where extreme pressures prevail.

    Applications

    For use in gate, ball, and plug valves. Suitable for use in hydrocarbon gasses, water, CO2 and H2S.

    DO NOT use in oxygen service.

    Features

    • Fully additive treated
    • 100% synthetic
    • High metal adhesion
    • Inhibited for H2S and CO2

    Physical Properties

    • Color – yellow to brown
    • Temperature range: -50 to 450°F
    • Penetration, 25°C, wkd, 60 strokes 170 to 180
    • Drop Point, °C none
    • Oxidation Stability, (D-942) 10 max
    • Specific Gravity @ 25°C .98

    Product Code – 117

    Everlast 146 Hydrocarbon Resistant

    Description

    Everlast 146 is a synthetic lubricant formulated for high chemical and mechanical stability to general hydrocarbon service. The synthetic polymer oils used in Everlast 146 make this an excellent all purpose gate valve lubricant and sealant for the oilfield. Everlast 146 is a blend of synthetic oils for use in valves carrying LPG, LNG, aliphatic hydrocarbon liquids and gasses ,including kerosene, fuel oils, crude distillates (sweet or sour), water, condensate, dilute acids and caustics. It is waterproof and has excellent resistance to oxidation and high metal adhesion.

    Applications

    For use in gate valves. Suitable for use in hydrocarbon liquids and gasses.

    DO NOT use in oxygen service.

    Features

    • Fully additive treated
    • 100% synthetic
    • Water resistant
    • High metal adhesion
    • Inhibited for H2S

    Physical Properties

    • Consistency, Cone Penetration (D-217) 220 to 300
    • Dropping Point, °F (D-566) none
    • Oil Separation, % wt. Loss (D-1742) 5 max
    • Oxidation Stability (D-942) 10 max
    • Rust Preventive Test (D-1743) pass
    • Temperature range: -40 to 500°F
    • Color – brown
    • Type Oil – synthetic
    • Corrosive Inhibitor – Imidazoline Derivative
    • EP Additive – Diester Type

    Product Code – 146

    Everlast 620 for High Pressure Plug Valves

    Description

    Everlast 620 is a high performance, synthetic valve lubricant and sealant for ball, plug, and gate valves. The advanced polymers and extreme pressure additives used in this product make it an excellent choice for use in high-pressure valves carrying natural gas, crude oil, condensate and ethylene. Everlast 620 contains unique solid lubricant additives that prevent metal to metal contact under extreme conditions of pressure and temperature. This product has been tested and found to prevent galling at pressures to 20,000 psi.

    Performance

    Everlast 620 is a specialized lubricant for close tolerance valves and will provide outstanding lubricity and high adhesion to polished metal surfaces. This grease provides corrosion protection and is water-resistant.

    Typical Properties

    • Appearance – white
    • Temperature range: -20 to 450 F
    • Penetration, 25 Deg C, wkd, 60 str 150 – 165
    • Drop Point, Deg C none
    • Oxidation Stability (D-942) 10 max

    Product Code – 620

    Everlast 50-400 High Visc Plug Valve H2S-CO2

    Description

    Everlast 50-400 is a high viscosity valve lubricant sealant that meets MIL-G-6032 “Grease Plug Valve, Gasoline & Oil Resistant”. 50-400 is designed for use in plug valves as a lubricant sealant. 50-400 is resistant to organic acids, caustic solutions and is inhibited for use in H2S and CO2. This product has excellent dual resistance to water and aliphatic hydrocarbons such as gasoline, jet fuel, lubricating oils, organic condensates and mixtures of these products. 50-400 can be used in a wide variety of applications from the wellhead to product pipelines.

    Applications

    For use in plug valves. Suitable for use in hydrocarbon gasses.

    DO NOT use in oxygen service.

    Features

    • Water insoluble and washout resistant
    • Fully additive treated
    • 100% synthetic
    • High metal adhesion
    • Inhibited for H2S and CO2

    Physical Properties

    • Consistency, Cone Penetration (D-217) 250 to 265
    • Dropping Point, °F (D-566) – none
    • Oil Separation, % wt. Loss, (D-1742) – 5 max
    • Oxidation Stability, (D-942) – 10 max
    • Rust Prevention, (D-1743) – pass
    • Temperature range: 0 to 400°F
    • Corrosion Inhibitor – Imidazoline Derivative
    • EP Additive – Diester Type

    Product Code – 50400HV

    Everlast 50-400 H2S and CO2 Ball and Gate Valve

    Description

    Everlast 50-400 is a dual-purpose valve lubricant/sealant that meets Mil-G-6032 “Grease Plug Valve, Gasoline & Oil Resistant”. 50-400 is designed for use in plug valves as a sealant and in ball and gate valves as a lubricant. 50-400 is resistant to organic acids, caustic solutions, and is inhibited for use in H2S and/or CO2. This product has excellent dual resistance to water and petroleum products such as gasoline, jet fuel, lubricating oils, and mixtures of these products. 50-400 can be used in a wide variety of applications from the wellhead to product pipelines.

    Applications

    For use in plug, ball, and gate valves. Suitable for use in hydrocarbon gasses.

    DO NOT use in oxygen service.

    Features

    • Water insoluble and washout resistant
    • Fully additive treated
    • 100% synthetic
    • High metal adhesion
    • Excellent corrosion resistance
    • Inhibited for H2S and CO2

    Physical Properties

    • Consistency, Cone Penetration (D-217) 250 to 300
    • Dropping Point, °F (D-566) – none
    • Oil Separation, % wt. Loss, (D-1742) – 5 max
    • Oxidation Stability, (D-942) – 2 @ 100 hours
    • Rust Prevention, (D-1743) – pass
    • Temperature range: 0 to 400°F
    • Corrosion Inhibitor – Imidazoline Derivative
    • EP Additive – Diester Type

    Product Code – 50400

    Everlast 960 – Hydrocarbon Resistant Lubricant/Sealant

    Description

    Everlast 960 is a synthetic lubricant formulated for high chemical and mechanical stability to general hydrocarbon service. The synthetic polymer oils used in Everlast 960 make this an excellent all purpose valve lubricant and sealant for the oilfield. Everlast 960 is a blend of synthetic oils for use in valves carrying LPG, LNG, aliphatic hydrocarbon liquids and gasses including, kerosene, fuel oils, sweet and sour crude distillates, dilute acids, and caustics.

    Applications

    For use in ball, plug, and gate valves.

    DO NOT use in oxygen service.

    Features

    • 100% synthetic
    • Contains Moly
    • High metal adhesion
    • Non-Melting
    • Biodegradable

    Properties

    • Consistency, Cone Penetration (D-217)
    • Bulk: 200 to 210
    • Dropping Point, (D-566) > 500°F
    • Temperature Range -10 to 400°F
    • @-10°F ASTM D-217 (Modified) = 68
    • @400°F Dropping point (D-566) > 500
    • Insoluble in H2O (FTM-5415)
    • Distilled H2O = Pass
    • Specific Gravity PLTL-90
    • Bulk: > 1.10
    • Stick: > 1.00
    • Flash Point (ASTM D-92) = > 300˚C
    • Oxidation Stability (D-942) = 10 max.
    • Copper Corrosion (ASTM-D4048) = Shiny 1b
    • Corrosion Test TM-0169
    • 2 Day Exposure: Pass (No Corrosion)
    • Biodegradable (ASTM D-5864-00) = Confirms

    Ordering Information

    Part # Description
    EV96040 Everlast 960/5 gallon/40 lb. pail
    EV960J16 Everlast 960/Size J(1-1/2” x 9”) 6 per box
    EV96010 Everlast 960/10 lb./5 quart p
    EV960120 Everlast 960-120 lb. drum
    EV960420 Everlast 960-420 lb. drum

    102 Special – Peanut Butter Type – Standard and Creamy

    Description

    Recommended for properly sealing WKM type gate valves handling water, gas, and condensate, oil petroleum products such as gasoline, butane, hydrocarbon vapors, ammonia, glycerin, solvents and sour gas. 102 Special is available in creamy and standard grades.

    Physical Properties

    • Appearance – light brown with a characteristic odor
    • Density – 9.35 to 9.55 lbs/gal
    • Oil Separation will not occur
    • Corrosion Inhibitor – Imidazoline
    • EP Additive – Diester Type
    • Temperature range: -30 to 250°F

    Product Codes

    • Standard Grade – SVD
    • Creamy Grade – SVC

    Longlife 1600 – Multi-Purpose Lubricant

    Description

    Premium 12-hydroxy stearate compounded with a premium additive system makes this an excellent multi-purpose grease with a broad temperature range. This product is water insoluble, washout resistant, and fully additive treated with corrosion inhibitors, extreme pressure additives, and oxidation inhibitor additives. It is an excellent choice where water resistance and a light valve grease is recommended.

    Application

    For use in ball and gate valves as a body filler. Protects seat rings and springs. Suitable for use in water and natural gas services.

    DO NOT use in oxygen service.

    Features

    • Water insoluble and washout resistant
    • Fully additive treated
    • Premium quality lithium 12-hydroxy stearate multi-purpose grease
    • Superior protection to lubricate a wide variety of heavy-duty equipment
    • Low staining

    Physical Properties

    • NLGI No. 2
    • Temperature range: 5° to 350°F
    • Color/texture – tan/smooth
    • Worked 60 penetration – D-217, 265 to 295
    • Timken OK load – D-2509, lb 45
    • Four-ball wear – D-2266, mm 0.40
    • Four-ball weld point – D-2596, kgf, 250

    Product Code – LL16

    Longlife 1603 – Multi-Purpose Lubricant

    Description

    Longlife 1603 is an economical multi-purpose grease especially suited for normal operating temperatures and other non-critical service applications. 1603 is an excellent corrosion inhibiting grease and is recommended for applications requiring frequent regreasing due to contaminating environments. This product is water insoluble, washout resistant, and fully additive treated with corrosion inhibitors, extreme pressure additives, and oxidation inhibitor additives. It is an excellent choice where an economical valve grease is recommended.

    Application

    For use in ball and gate valves as a body filler. Protects seat rings and springs. Suitable for use in water and clean natural gas services.

    DO NOT use in oxygen service.

    Features

    • Water resistant
    • Fully additive treated
    • Multi-purpose grease

    Physical Properties

    • NLGI No. 2
    • Temperature range: 0° to 265°F
    • Color/texture – dark brown/smooth, medium fiber
    • Worked 60 penetration – D-217, 265 to 295
    • Dropping point – D-566, 375°F, 191°C

    Product Code – LL1603

    Longlife Moly – Heavy Duty Moly Lubricant

    Description

    Longlife Moly (3% Moly-Lithium) EP Grease is a fully additive treated, multi-purpose grease that is water soluble and is treated for extra protection. It contains antirust, anti-wear, extreme pressure, and antioxidant additives. It is a good quality molybdenum disulfide compounded multipurpose grease, also treated with soluble chemical additives to prevent wear, especially under very highly loaded conditions. Use Longlife Moly in general purpose applications where medium to severe conditions prevail. Longlife Moly meets Caterpillar requirements for 3% molybdenum disulfide, lithium soap grease.

    Features

    • Water insoluble and washout resistant
    • Fully additive treated
    • Meets Caterpillar requirements for 3% molybdenum disulfide, lithium soap grease

    Physical Properties

    • NLGI No. 2
    • Thickener – Lithium Stearate
    • Color/texture – observed gray/smooth with slight fiber
    • Fillers – 3% molybdenum disulfide
    • Worked 60 penetration – D-217 265 to 295
    • Dropping point – D-566, 340°F, 171°C
    • Wheel Bearing Leakage – D-1263, rating pass
    • Oil separation – D-1742, % loss 3.8
    • Rust prevention – D-1743, rating pass
    • Oxidation Stability – D-942, psi drop 5.0 at 100 hr.
    • Temperature range: -50° to 280°F

    Product Code – LLM

    LZ-11 – Silicone Lubricant

    Description

    LZ-11 is a highly purified silicone lubricant that resists deterioration by chlorides, solvents, acids, low-pressure steam, and condensate. LZ-11 is designed for use on plug valves, gate valves, butterfly valves, swivel joints, mechanical seals and packing, and flexible ball joints exposed to harsh chemical environments. It is also an excellent lubricant for rubber and plastic o-rings, sealing vacuum and pressure systems.

    Application

    For use in plug, gate, and ball valves. Suitable for use in hydrocarbon gasses.

    Physical Properties

    • Consistency, cone penetration – D-217, 220 to 300
    • Dropping point – F (D-566) none
    • Oil separation – % wt. loss (D-1742) 5 max
    • Oxidation stability – D-942, 10 max
    • Rust preventive test – D-1743, rating pass
    • Low temperature torque – D-1478 @ -75°F (-60°C) start 5200 gm-cm
    • Flash point – 610°F
    • Temperature ranges: -40° to 400°F
    • Color – clear/white
    • Type oil – silicone

    Product Code – LZ11

    Longlife SRL-50 – Sucker Rod Lubricant

    Description

    Longlife SRL-50 is engineered to protect the threads of sucker rod connections under severe operating conditions of high cyclic loading. SRL-50 is a high temperature, lithium complex EP grease with excellent low temperature properties. SRL-50 is a unique blend of petroleum base oils and synthetic fluids providing excellent resistance to oxidation at elevated temperatures with exceptional performance under extreme low temperature conditions. SRL-50 contains EP/anti-wear additives and rust and oxidation inhibitors that provide superior protection from thread galling in sucker rod connections.

    Application

    Clean the connection prior to make up. Apply a thin coat of SRL-50 to the thread.

    CAUTION: Do not lubricate the pin shoulder face or the coupling shoulder face or a loss of tightness can occur resulting in a connection failure.

    Physical Properties

    • NLGI No. 2
    • Color/texture – blue/smooth
    • Unworked penetration – D-217 265 to 295
    • Worked 60 penetration – D-217 265 to 295
    • Oxidation stability – D-942 psi drop 2.5 @ 100 hr.
    • Oil separation – D-1742, % loss 1.0
    • Timken OK load – D-2509, lb 70
    • Four-ball wear – D-2266, mm 0.45
    • Four-ball weld point – D-2596, kgf, 315
    • Dropping point – D-2265, 550°F (288°C)
    • Temperature range: -65° to 356°F (-54° to 180°C)

    Product Code – SRL50

    Longlife 1200 – Synthetic Hydrocarbon Grease

    Description

    Longlife 1200 is a multi-purpose synthetic grease developed for high speed turbine engine bearings and conforms to Mil-G-81322E. It has excellent long life and anti-rust properties for service temperatures ranging from -80°F to 400°F. It can be operated to 600°F, depending upon speed and load, environmental factors, and relubrication frequency.

    Application

    Longlife 1200 is highly recommended for use in a wide range of industrial equipment. Use on sheathed cables, O-rings, seals, gears, ball, roller, and plain spherical bearings. It is especially suitable for use in plastic and/or metal gear boxes where service temperature range and minimal evaporative losses are critical.

    Physical Properties

    • NLGI No. 2
    • Color/texture – tan/smooth
    • Unworked penetration – D-1403: 270
    • Worked 60 penetration – D-1403: 285
    • Worked stability – FED-STD-791, method 313@ 100,000 strokes: 310
    • Oxidation stability – D-942, psi drop: 100 hr. @ 212°F, -2.5 psi 500 hr. @ 212°F, -9.0 psi
    • Oil separation – Fed-STD-791, method 321: 30 hr. @ 212°F, -0.90% 30 hr. @ 350°F, 3.50%
    • Dropping point – D-2265, 550°F, 288°C
    • Evaporation – D-2595: 22 hr. @ 210°F, 0.50% 22 hr. @ 350°F, 5.40%
    • Dirt count – Fed-STD-791, method 3005: 10 to 75 microns, 65/cc over 75 microns, 0/cc
    • Rubber swell, FED-STD-791, method 3603, “L” stock 168 hrs. @ 158°F: 4.0%
    • Rust preventive properties – D-1743, 48 hrs. @ 125°F: 1
    • Load wear index, ASTM D-2596, @ 77°F: 48.0
    • Last non-seizure, (load/wear scar): 100kg/0.454 mm7
    • Last seizure (load/wear scar): 126kg/2.590 mm
    • Weld point (load): 250 kg
    • Steel-on-steel wear, ASTM D-2266, (52100 steel), 1200 rpm, 40 kg. 2 hrs. @ 167°F: 0.7 mm, 1200 RPM, 40 kg. 2 hrs. @ 350°F: 0.8 mm
    • Coefficient of friction, 1200 RPM, 90°F, 15 kg load: 0.09
    • Gear wear, FED-STD-791, method 335, 1000 cycles: 5 lb load, 0.68 mg, 10 lb load, 1.60 mg
    • High temperature performance, ASTM D-3336: 300°F, 10,000 rpm, 50 lb, 2,500 hrs plus 350°F, 10,000 rpm, 50 lb, 525 hrs, 350°F, 10,000 rpm, 5 lb, 1,000 hrs plus 400°F, 10,000 rpm, 50 lb, 264 hrs
    • Low temperature torque, ASTM D-1478: @ -65°F, starting, 1,534 g-cm running, 649 g-cm
    • Corrosion on copper: 24 hrs @ 212°F, 1a no stain

    Product Code – LL1200

    Longlife 1607 – High-Temp Multi-Purpose

    Description

    Longlife 1607 is a multi-purpose synthetic grease combined with a dropping point of 550°F for application over a wide temperature range. Longlife 1607 grease exhibits a Timken OK Load in excess of 80 pounds and excellent four-ball wear and EP performance. This product will provide superior protection to lubricate a wide variety of automotive, trucking, mining, construction, and industrial equipment with excellent performance in severe applications and unequaled shock load protection.

    Application

    Longlife 1607 is highly recommended for disk brake wheel bearings, fan hubs, backhoe hinge pins, oven conveyor bearings, and other heavily loaded and/or high speed industrial application.

    Physical Properties

    • NLGI No. 2
    • Color/texture – red/stringy-smooth
    • Worked 60 penetration – D-217, 265 to 295
    • Oxidation stability – D-942, psi drop: 2 @ 100 hr.
    • Oil separation – D-1742, % loss less than 1
    • Dropping point – D-2265, 550°F, 288°C
    • Rust preventive properties – D-1743, pass
    • Copper corrosion – D-4048, rating pass
    • Timken OK load – D-2509, 80 lb.

    • Four-ball wear – D-2266, mm 0.45
    • Four-ball weld point – D-2596, kgf, 315
    • Four-ball load wear index – D2596, kgf 50
    • Four-ball last non-seizure – D2596, kgf 80
    • Temperature range: -10° to 325°F, -23° to 163°C

    Product Code – LL1607

    Our Valued Clients